Dave Smith Instruments Prophet 12 Bedienungsanleitung PDF herunterladen (Seite 23)

Prophet 12 Module Operation Manual

Global Settings

21. Autotune Filters—

Press Start Tuning (soft key 1) and follow the onscreen

instructions to tune the low- and high-pass lters.

Note: The lters are calibrated at the factory and under normal circum-

stances should not require re-calibration or re-tuning.

22. Reset Globals—

Sets the global parameters to the factory default settings.

23. Dump Current Program—

Transmits the current program in SysEx

format via the selected MIDI port. (See “9. MIDI Sysex Cable.”) Dumped

programs will load back into the same bank and program location in memory

when received by the Prophet 12 via MIDI.

24. Dump Current Bank—

Transmits the current bank in SysEx format via

the selected MIDI port. (See “9. MIDI Sysex Cable.”) Dumped banks will load

back into the same bank location in memory when received by the Prophet 12 via

MIDI.

25. Dump All User Banks—

Transmits all four User Banks in SysEx format

via the selected MIDI port. (See “9. MIDI Sysex Cable.”) Dumped banks will

load back into the same bank location in memory when received by the Prophet

12 via MIDI.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 103 104

Keine Kommentare

Dave Smith Instruments Prophet 12 Bedienungsanleitung Seite 23