Dave Smith Instruments Pro 2 Technical Information PDF herunterladen (Seite 56)

System Settings

Tempest

System Settings

Press SYSTEM to view the System menu. The System menu contains various

global parameters that apply to all operation regardless of the selected Beat or

Sound. Any changes to these settings are remembered even after power is turned

off.

Click Level: 1...127—Sets the volume of the metronome click.

One bar count in: Off, On, Record Only—When On, one bar of metronome

clicks plays before recording or playback begins. If set to Record Only, the count

in only plays before recording. If Off, no count in plays.

Note: Count in does not play when syncing to an external MIDI clock.

Fixed Level Velocity: 2...128—Sets the velocity value used when fixed level

in Pad Options is on.

Pedal 1/2 Mode: Controller, Switch +, Switch -

Pedal 1/2 Assignment: See table—Tempest’s two Pedal/Switch inputs can be

conguredtoworkwitheithermomentaryfootswitchesorexpressionpedalsto

control various functions.

Use Pedal Mode to choose the input device: Controller for an expression pedal,

Switch + for a normally open footswitch, and Switch – for a normally closed

footswitch.

The table below lists the Pedal Assignment options and the input devices with

which they are typically used.

Expression Pedal Footswitch

Mod Source Pedal 1/2 Sequencer Start/Stop

Master Volume Sequencer Start

Note FX 1 Sequencer Stop

Note FX 2 Record Arm On/Off

Note FX 3 Roll On/Off

Note FX 4 Reverse On/Off

Mod Source Pedal 1 or 2 routes an expression pedal directly to the Foot Pedal 1

or 2 modulation source. (See “Modulation Paths” on page 29 for more infor-

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 71 72

Keine Kommentare

Dave Smith Instruments Pro 2 Technical Information Seite 56